Heatless Regeneration RELIABLE DRYING CAPACITY FROM -40°C: BOGE DAZ SERIES

Extremely dry air with the DAZ series adsorption dryers: Sometimes extremely dry air (i.e. lower than pressure dew point) is required, for example when control or process air applications are used in the food and beverage industries, as well as in the chemical and pharmaceutical industries. This is made possible with an adsorption dryer with a pressure dew point of -40°C (-70°C optional). Take advantage of BOGE’s DAZ Series heatless adsorption dryer, which regenerates a partial stream of dry compressed air parallel to the adsorption of the desiccant.

PRODUCT
Next-generation compressed air refrigerant dryer are systematically designed to save energy

External Heated Regeneration and Vacuum Cooling COMPRESSED AIR DRYING WITH A LOW ENERGY SYSTEM: THE BOGE DAV-2 SERIES

Where large volume flows meet particularly high demands on compressed air quality (pharmaceutical, electrical and automotive industries), BOGE adsorption dryers are the technology of choice: while the moisture is bound to the surface of the high‑quality two‑bed desiccant filling in a receiver (adsorption), the other receiver regenerates. During the regeneration process, ambient air is drawn from the bottom to the top of the receiver over the desiccant bed via a heater and the stored moisture is discharged to the outside. So no purge air needs to be removed from the already dried process air. As a result, the DAV dryers consume up to 25% less energy compared to heatless systems.

PRODUCT
Adsorption dryers, external heated regeneration and vacuum cooling

  • Intelligent control system
  • Minimal pressure losses
  • Pressure dew points down to -70°C
  • Service-friendly
  • Thermal insulation
  • Zero purge system
Heatless Regeneration and Active Carbon Adsorber THE COMPLETE PACKAGE FOR DRYING AND OIL-FREE COMPRESSED AIR: THE BOGE DACZ SERIES

With the BOGE DACZ series, we have combined a cold-regenerated DAZ adsorption dryer with a DCZ activated carbon adsorber. In addition to the pressure dew point of -40°C (-70°C optional) this allows you to limit the residual oil content of the compressed air to 0.003mg/m³.

PRODUCT
Adsorption dryers, heatless regeneration and active carbon adsorber

Adsorption Dryers for Breathing Air RELIABLE AND EFFICIENT MEDICAL BREATHING AIR: THE BOGE DASZ SERIES

Do you want to efficiently and reliably create compressed air for the most delicate requirements? With the processing units of the DASZ-P Series, you can create breathing air for both industrial and medical purposes. In two chambers, the compressed air is passed through the drier after the pressure swing adsorption has removed any pollutants. Also thanks to the integrated filters plus the detergent and catalyst, the resultant breathing air meets, among other criteria, the standards of the Pharmacopée Européenne.

PRODUCT

Adsorption dryers for breathing air